JEEZ Platypus PRO parameters and technical description
Platypus PRO is an refillable vape kit.
The set consists of one rod, two pods and one charging cable.
The color of the kit is black and green.
The battery rod size is 21.4*15.4*81.2mm.
The whole kit size is 21.4*15.4*105.8mm.
Battery capacity: 700mAh.
It can smoke about 600 puffs when fully charged.
Output mode: constant power 3.5V/10W output.
Charging interface: USB Type-C.
Input current: 5V/450mA.Support fast charging up to 10V voltage.
Ordinary mobile phone chargers can be charged.
But it does not support super fast charging and high-power chargers.
For example, computer chargers and tablet chargers cannot be used to charge this product. If you connect a charger with a charging power exceeding 10V, the charging chip will be permanently damaged.Please check whether the charger is below 10V before charging.
When received, the kit is turned off and needs to be turned on first. Press 5 times within 2 seconds, the indicator light will flash 3 times, and it will start up immediately. If it is not in use, it is recommended to turn it off to avoid accidental touching by children. The method of turning on and off is the same.
It will vibrate when the pod is inserted It will vibrate if it is puffed for more than 6 seconds.
Note: Suctioning for more than 6 seconds will automatically turn on the timeout protection. At this time, the indicator light will flash 3 times and the motor will vibrate once.
Vibrates when charging cable is plugged in When the charging cable is plugged in, the light starts blinking.
When the battery is fully charged, the indicator light turns off automatically.
So what else can the button be used for besides turning on and off the machine? It can also be used for button suction, the button suction is high-frequency gear, and the smoke is greater.
After starting up, puff directly is the low frequency gear Button suction is high-frequency gear, the smoke is bigger.
Is it possible to use the high-frequency gear to inhale directly without pressing the button? Yes, you can!
Press the button 3 times within 2 seconds, and the white light flashes 2 times, indicating that it has switched to high-frequency gear. Press the button 2 times within 2 seconds, the white light flashes 1 time, indicating that it has switched to low frequency gear.
Power display:
More than 50% power is green light. 20%-50% power is blue light. When the power is less than 20%, it is red light.
Shop link: