How to use well of your refillable vape pods?

How to use well of your refillable vape pods?

The e-juice injection hole is located on the side of the empty pod
Seal with silicone plug
It is recommended to refuel each empty pod and replace it with a new one after 3 to 5 times of use
After filling in the e-juice, put the pod upright and let it stand for ten minutes
After ten minutes, connect to the device and use it
Fully moisten the atomizing core of the pod to avoid burning the core
Precautions for the use of platypus Pro empty pod
Firstly, when smoking, do not blow into the mouthpiece
When exhaling, hold the mouthpiece away from your lips
To avoid oil leakage and increased condensation
Secondly, it is not recommended to puff heavily for more than 6 seconds
or puff by lying down
or uninterrupted rapid continuous suction in a short period of time
Otherwise, the pod will easily burn the core or the e-juice will be sucked into mouth
Thirdly, do not expose electronic cigarettes to sunlight
In high temperature weather, if you place the pod with e-juce in the car for a long time
Due to the influence of temperature, it may cause e-juice leakage
If you need to store electronic cigarettes for a long time, it is recommended to put them in a sealed bag
Similarly, when flying or going to some high-altitude areas
The pods and e-liquid can be packed in a sealed bag
and squeeze the air out of the sealed bag
Avoid e-juice leakage due to changes in air pressure
Fourthly, the Platypus Pro is equipped with components with high power and relatively high battery discharge.
Therefore, the explosive power of atomization is relatively sufficient
However, long-term use will produce condensation
It is recommended that you take out the pod before and after use
turn the mouthpiece down
Wrap it in a paper towel and shake it lightly
Clean out the condensate generated in the atomization chamber
Twist the paper towels into thin strips
Stuff a paper towel into the chimney and turn it around
Wipe off the condensate attached to the flue
Fifthly, pay attention to observing the condensation groove inside the battery rod and the bottom of the pod
If there is condensation, wipe it off with a cotton swab or wet paper towel in time
So as not to cause poor contact or damage the equipment
Sixthly, when the e-liquid in the pod is almost used up, fill it in time
Avoid dry burning of the atomizing core and reduce the service life of the atomizing core
Twist the paper towel into a thin shape before filling
Use a paper towel to absorb the remaining e-juice at the bottom of the pod
Suck it all up and then inject the e-liquid, the taste will be better
Seventhly, in order to ensure the taste of Platypus PRO empty pod atomization
It is recommended that a cartridge be filled with e-juice three to five times
Replace with a new Platypus PRO pod
Kind tips
When you receive the Platypus PRO stick, it will be turned off by default, and you need to turn it on first.
Press the button 5 times within 2 seconds, and the indicator light flashes 3 times to start the machine
When not in use, especially in pockets, bags or uneven places
Please do not place directly
It should be turned off first, and then placed (the same way for switching on and off)
To avoid touching the button by mistake, the device works by itself
Whatsapp: +86 136 5238 8013
Telegram: +1 442-234-9389
Wechat: jeeztian
More than 1000 sets of this e-cig product can be OEM, price negotiable.
ブログに戻る